We will reply to your message within an hour.
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.
The flange ensures proper positioning inside a tube or housing.
Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.
Use where high loads and speeds are not required.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Good for underwater applications, these bearings won’t swell or warp when wet.
Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.
These roller bearings handle extremely high speeds for their small size.
The choice for low-friction motion in high-temperature environments.
Instead of replacing your shaft or keeping components, such as couplings, with various bore diameters on hand, these reducers adapt the bore of a component to a smaller size.
These urethane rollers are nonmarring and wear resistant.
A slippery UHMW polyethylene surface means these rollers won't stick to adjacent parts. Rollers are also highly corrosion resistant.
The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact.
A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape.
The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots.